After Use - Rowenta IS6300 Manual De Instrucciones

Notice ROWENTA IS6300-1800128731_110X154 19/12/12 11:12 Page9
2 • Lint pad
The lint pad is a separate accessory and cannot be attached to the steam head.You
can use the lint pad independently from the steamer.
The lint pad removes hair, lint and animal fur for a professional finish.
• To use the lint pad, slowly brush the clothing with the grain or nap of the fabric.
• The pad can be cleaned by brushing it in the opposite direction. We recommend
cleaning the pad on an old cloth that can be discarded.
• We recommend to use the lint pad before steaming your clothes for perfect results.
3 • Delicates steam cap
The steam cap cannot be used together with the fabric brush on the steam head.
Be sure unit is unplugged and completely cool before attaching accesories.

AFTER USE

• After using the garment steamer, switch off the device by pressing the pedal once
again. The power indicator light will go off, and you can then unplug the device.
• Hang the steam head in an upright position on the hook when not in use.
• Unlock the Roll & Press handle from its hook on the pole (fig. 21). Keep your hand on
the handle while the shade is rolling back to the top.
Warning: never let go of the handle until the shade has totally rolled back.
Once the device is switched off, it is recommended to wait several minutes so that
the Roll & Press shade has dried before rolling it back.
• Empty and rinse the water tank each time before storage in order to flush out any
scale particles. (fig. 22)
• Loosely wind up the electrical cord and close with the Velcro strip, then hang it from
the clip on the pole. (fig.23 - fig. 24)
• Do not carry the steamer by the water tank handle. This appliance includes luggage
style wheels for added convenience when transporting.
Warning: Never touch the head until it has cooled down completely.
1 • TRANSPORT
• Your device is fitted with two wheels for ease of transport. Tilt the device towards the
rear holding the pole and then pull along to transport.
• You can also lift up the device in order to transport it, again holding the device by the
pole.
The steam cap provides even distribution of
steam, filters impurities from the water and
protects fabrics from water dripping.
• Attach the steam cap to the steam head.
The steam head should be totally covered.
• Gently press the steam head with cap on the
area to be steamed.
• Remove the steam cap once unit is unplugged
and completely cool.
9