Cleaning And Care; Safety Cut-Out - Klarstein 10032725 Manual Del Usuario

EN
22
Press once → 1000 W
Press twice → 2000 W
Open window On/Off.
Once the window opened and the temperature down 5 C in 30mins
the heater will be stop.
Press to turn the Timer settings On/Off.

SAFETY CUT-OUT

This appliance is fitted with a safety cut-off which will operate if the fire overheats (e.g.
due to blocked air vents). For safety reasons, the fire will NOT automatically reset.
To reset the appliance, disconnect the appliance from the mains supply for at least 15
minutes. Reconnect to the mains supply and switch on the appliance.
Do not open this product. There are no userserviceable parts inside

CLEANING AND CARE

Warning: Danger of electric shock
Always disconnect from the mains supply before cleaning the wall fire.
Do not allow water or other liquids to run into the interior of the
product,.
Caution: Danger of burns
Allow the product to completely cool before handling or cleaning it.