Using The Headset With A Bluetooth; Pairing The First Device; Device - Bose A20 Guia Del Usuario

Using the headset with a Bluetooth

Pairing the first device

Press to turn on the headset.
1.
Make sure the Secondary Audio Mode selector is in the MUTE or MIX position
2.
(not OFF).
MUTE
The power indicator glows green or yellow, depending on the charge level of
the battery. (If the light is red, the battery is low and needs replacing.)
The Bluetooth indicator flashes purple to indicate that the headset is in pairing
mode.
The first time you turn on the headset, it will automatically go into pairing
Note:
mode and the Bluetooth indicator will flash purple. This will only happen
the first time you turn on the headset.
Locate the Bluetooth menu on your device and make sure the Bluetooth
3.
feature is ON.
Select
4. Bose A20
Bose A20
The Bluetooth indicator flashes blue while the devices are pairing, and a tone
indicates successful connection.
After five minutes of inactivity, the headset will automatically exit pairing
Note:
mode and the Bluetooth indicator will turn off. To turn the Bluetooth
feature back on, press
Each time you turn on the Bluetooth feature, the headset will attempt to
Note:
reconnect with the two most recently connected Bluetooth devices. If the
device(s) are turned off, or out of range, the headset will return to pairing
mode after five minutes. See "Reconnecting to a previously connected
device" on page 24.
MIX
from the Bluetooth device list.
.
Using the Headset

device

®
English - 21