DJI RONIN 2 Guia Del Usuario página 4

2. Use a screw to secure the hot shoe plate to the top of the camera.
3. Mount the top cross bar to the mounting plate and tighten two 1/4" screws.
Mounting to a Camera with a Hot Shoe
There is no need to use the hot shoe plate if using a camera already with a hot shoe.
1. Slide the mounting plate into the hot shoe of the camera. Then tighten the two screws in
the middle part using a 3 mm hex key to secure the mounting plate.
2. Mount the top cross bar to the mounting plate and tighten two 1/4" screws.
3