Installing The Fan - LUCCI Air AIRFUSION AKMANI Instrucciones De Instalación

Airfusion Akmani Installation Instructions
TOOLS REQUIRED:
- Flat head screwdriver
- Pair of pliers
- Adjustable spanner
- Step ladder
- Wire cutter
- Wiring, supply cable as required by local provincial and national wiring codes and regulations.
INSTALLING THE MOUNTING BRACKET
The ceiling fan must be installed in a location so that the blades are 30 cm spacing from the tip of the blade to the
nearest objects or walls.
Secure the hanging bracket to the ceiling joist or structure that is capable of carrying a load of at least 40 kg, with two
long screws provided. Ensure at least 3 cm of the screw is threaded into the support.
NOTE: The bracket screws provided are for use with wooden structures only. For structures other than wood,
the appropriate screw type MUST be used.
ANGLED CEILING INSTALLATION
This fan hanging system supports a maximum 20 degree angled
ceiling installation.
4 | P a g e

INSTALLING THE FAN

Fig. 3
Fig. 2