Klarstein Bolero Manual Del Usuario página 11

4
Insert the remote control
receiver between the
bracket and the ball
joint.
7
Fasten the blade to the
motor with the screws
and spring washers
already attached to the
motor.
5
Connect the wires from
the earthed mains
supply to the terminal
block.
8
Connect the light kit
by clipping together
the two plastic male/
female connectors.
6
Slide the slots on the
canopy onto the screws
at either end of the
mounting plate, secure
with the four screws,
spring washers and star
washers provided.
9
Fit the shade gallery
to the shade gallery
mounting bracket by
using the three light
kit-fixing screws and
star washers. Ensure
that you do not trap
any wires.
EN
11