Charge Indicator; Default Setting; Operation; Calls - GE 25831 Guia Del Usuario

1. Press and hold the page button on the base until the CHARGE/IN USE indicator
on the base flashes.
2. Press and hold the page button on the base again until the CHARGE/IN USE
indicator on the base flashes rapidly.
3. Press and release the page button on the base once. All handsets are de-registered
and HANDSET NEEDS REGISTRATION shows in the display.
D S
EFAULT ETTING
As you become familiar with this system, you may prefer to use the system's
original settings. Follow the steps below to return to the factory default settings.
1. Press the CALLER ID-VOL (- or +) button to scroll to the DEFAULT SETTING menu.
2. Press the MUTE/PROG button to enter the menu. DEFAULT SETTING 1YES 2NO
shows in the display.
3. Use the touch-tone pad to select 1YES or 2NO , or use the CALLER ID-VOL (- or +)
button to move the cursor to 1YES or 1YES . " 2NO " is default setting.
NOTE: If you choose "YES" all the settings in the programmable menu are
returned to factory default setting.
4. Press the MUTE/PROG button to save your selection. You will hear a
confirmation tone.
T O
ELEPHONE
C I
HARGE NDICATOR
When the CHARGE/IN USE indicator on the base is lit, the handset is correctly
seated in the cradle and is charging.
NOTE: The CHARGE/IN USE indicator on the base is also lit when the
handset is in use.
M C
AKING ALLS
1. Pick up the handset, and press the TALK/CALLBACK button. Listen for a dial tone.
2. Dial the number you want to call, or dial the number first then press the
TALK/CALLBACK button.
3. When finished, press the TALK/CALLBACK button to hang up.
A C
NSWERING ALLS
1. When the phone rings, pick up the handset, and press the TALK/CALLBACK button.
2. When finished, press TALK/CALLBACK to hang up.
PERATION
19