Aking An Intercom; Mute; Receiver Volume Control; D O Not Disturb (Dnd) - GE 25831 Guia Del Usuario

P
AGING FROM THE
Use the base-only to page all registered handsets at the same time.
1. Press the page button on the base. All handsets beep for two minutes, and
PAGING FROM BASE shows on each handset's display.
2. To cancel the page, press the page button on the base, or press the TALK/
CALLBACK button or the *EXIT button on each handset.
M
UTE
To have a private, off-line conversation, use the MUTE feature. The party on the
telephone line cannot hear you, but you can hear them.
1. Press the MUTE/PROG button. The handset display shows MUTE ON .
2. Press the MUTE/PROG button to cancel and return to your phone conversation.
R V
ECEIVER OLUME
When the handset is ON (in talk mode) you may adjust the receiver volume by
pressing the CALLER ID-VOL (- or +) button. There are four volume levels to choose
from. When the maximum or minimum volume level is reached, the phone beeps
twice. VOL 1 is minimum and VOL 4 is maximum.
D N D
O OT ISTURB
DND allows you to mute the ringer of the handset.
In the standby mode, press the DO NOT DISTURB button on the base. The DND
backlit indicator will light and DO NOT DISTURB shows in handset display.
To cancel, press DO NOT DISTURB again.
I O
NTERCOM
The intercom feature allows you to have a conversation with another registered
handset without tying up the telephone line. And since the telephone line is not in
use, you may still receive incoming calls.
M I
AKING AN NTERCOM
1. Make sure the phone is OFF (not in talk mode).
2. Press the INT button on the handset.
3. Use the touch-tone pad to select the handset you want to page.
NOTE: To cancel page, press the INT button again or the *EXIT button on
the sending handset.
4. Wait for the person at the receiving handset to press the INT button.
B /G P
ASE ROUP
C
ONTROL
(DND)
PERATION
C
ALL
AGE
23