Eleting Ecords; Tored In Emory - GE 25831 Guia Del Usuario

NOTE: If the memory location is occupied, "REPLACE MEMO?" is displayed, and
you must confirm replacement by pressing the MEMORY button.
7. Press MEMORY button to save.
8. To enter another name and number in a different memory location, return to
step 2 and repeat the process.
NOTE: If the redial number has more than 20 digits, it cannot be stored in memory.
I P
NSERTING A AUSE IN THE
Press the #PAUSE/RINGER button on the handset's touch-tone pad to insert a delay
in dialing sequence when a pause is needed to wait for a dial tone (for example,
after you dial 9 for an outside line, or to wait for a computer access tone.) Each
pause counts as one digit in the dialing sequence.
R R
EVIEWING ECORDS
1. Make sure the phone is OFF (not in talk mode).
2. Press the MEMORY button to display SELECT MEMORY 01-50 .
3. Press the CALLER ID-VOL (- or +) buttons to scroll the records, or use the
handset's touch-tone pad to enter the memory location number.
C R
HANGING ECORDS
Follow the procedure for Storing Names and Numbers in Memory, except replace
a stored telephone number with a new one.
D R
ELETING ECORDS
1. Make sure the phone is OFF (not in talk mode).
2. Press the MEMORY button to display SELECT MEMORY 01-50 .
3. Press the CALLER ID-VOL (- or +) button to scroll to the record you want to
delete or use the touch-tone pad to enter the desired memory location.
4. Press the DELETE button to mark the record for deletion. The display
shows DELETE?
5. Press the DELETE button to delete the record. DELETED shows in the display.
NOTE: If you don't want to change or delete a record, simply press the
*EXIT button, or wait for one minute to exit the review mode automatically.
D S
IALING
S M
TORED IN EMORY
S M
TORED IN EMORY
S M
TORED IN EMORY
(
EQUENCE OF A
S N
TORED UMBER
)
27