Installation Preparation; Tools You Will Need - GE Monogram WD35X20471 Instrucciones De Instalación

PARTS SUPPLIED IN INSTALLATION
PACKAGE:
• Junction box cover and #10 hex-head screw
• Hose clamp
• Drain hose (approximately 58" long)
• Drain hose hanger
• 2 #8-18 hex head screws to secure brackets to
washer tub frame
• 1 top trim piece
• 2 side trim pieces
• 2 mounting brackets for wood countertops
or side cabinets
• 2 #8-18 x 5/8" Phillips special head screws,
to secure dishwasher to underside of
countertop or to side cabinets
• Literature, samples and/or coupons
MATERIALS YOU WILL NEED:
• 90° elbow (3/4"hose internal thread on one end,
opposite end sized to fit water supply)
• UL-listed wire nuts (3)
• Masking Tape
Materials For New Installations Only:
• Air gap for drain hose, if required
• Waste tee for house plumbing, if applicable
• Electrical cable or Power Cord Kit WX09X70910 (5.4 Ft)
or WX09X70911 (7.9 ft) depending on your installation.
• Screw-type hose clamps
• Strain relief for electrical connection
• Hand shut-off valve (recommended)
• Hot Water Line–3/8" minimum, copper tubing
(including ferrule, compression nut) or GE Part #
WX28X326, flexible braided hose.
• WD24X10065 drain hose (12' long), if needed.

TOOLS YOU WILL NEED:

• Phillips-head screwdriver
• 5/16" and 1/4" nutdriver
• 6" Adjustable wrench
• Level
• Carpenter's square
• Measuring tape
• Safety glasses
• Flashlight
• Bucket to catch water when flushing the line
• 15/16" socket (optional for skid removal)
• Gloves
• Pliers
For New Installations Only:
• Tubing cutter
• Drill and appropriate bits
• Hole saw set

Installation Preparation

Junction
Box Cover
Mounting
Brackets
90°Elbow
Air Gap
Strain Relief
Phillips-Head
Screwdriver
15/16" Socket
Flashlight
Safety Glasses
3
#10 Hose Clamp
Hex-Head
Junction
Box Screw
1/2" long
Drain Hose Hanger
Top Trim Piece
#8 Phillips
Special
Head Screws
5/8" long
Wire Nuts (3)
Electrical Cable
(or Power Cord, if applicable)
Waste Tee
Hot Water Line
Hand
Shut-Off
Valve
1/4" and 5/16"
Nutdriver
Pliers
Measuring Tape
6" Adjustable
Wrench
Drill and Bits
Hole Saw Set
Drain Hose
#8 Hex-Head Mounting
Bracket Screws
Side Trim Pieces
Literature
Coupler for
optional drain
hose
Hose Clamps
Optional
12' Drain Hose
WD24X10065
Level
Carpenter's
Square
Tubing Cutter
Gloves
Bucket