GE Monogram WD35X20471 Instrucciones De Instalación página 9

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

SLIDE DISHWASHER THREE-FOURTHS
STEP 10
OF THE WAY INTO CABINET
IMPORTANT
Do not push against front panel with
knees. Damage will occur.
• Grasp the sides of the front panel and slide dishwasher
into the opening a few inches at a time.
Do not push against
front door panel with
knee. Damage to the
door panel will occur.
• As you proceed, pull the drain hose through the opening
under the sink. Stop pushing when the dishwasher
extends about 6 inches forward of adjacent cabinets.
• Make sure drain hose is not kinked under or behind the
dishwasher.
• Make certain the house wiring, drain line and water line
do not interfere with components under dishwasher.
Dishwasher Installation
Figure Q
9
STEP 11 INSTALL TRIM PIECES
In this step you will need the trim pieces set aside in Step 1.
Top Trim
Side Trim
Figure R
Top
View
• Select the top trim piece (See Figure R) and line up
center to the top latch. Press the trim piece onto the
tub flange moving from one side to the other.
• Select the left trim piece (see Figure R). Align top edge
with the top trim and press it onto the left side of the
tub flange moving from the top to the bottom. Repeat
for the right side tub flange trim piece. (See Figure R for
right side trim piece.)
Side
Trim
Top View
Side
Trim
Fully seat to tub flange
Tub frame
Tub trim
Door
Handle

Publicidad

Tabla de contenido
loading

Tabla de contenido