Kit Assembly - Metra 95-7356B Instrucciones De Instalación

ISO DDIN radio provision
1. Attach the factory panel clips to
the radio housing (Figure A)
2. Attach the factory hazard button
to the radio trim panel with the
#8 x 3/8" screws provided.
(Figure A)
3. Slide the radio into the radio
brackets and secure with the
screws supplied with the radio.
(Figure B)
4. Locate the factory wiring harness
in the dash. Metra recommends
using the proper mating adapter
from Metra or AXXESS. Test the
unit for proper operation.
5. Snap the radio trim panel over the
new radio and reassemble dash in
reverse order of disassembly.

Kit Assembly

(Figure A)
95-7356B
(Figure B)
3