Ugolini ARCTIC Compact Serie Manual De Instrucciones página 14

Arctic Compact 5-8
6
Wipe clean all exterior surfaces of the unit.
Do not use abrasive cleaner.
7. 3. 4 ASSEMBLY
1
Slide the drip tray into place.
2
Pinch tube faucet: push the dispensing
handle (1) and insert the pinch tube into its
vertical seat in the bowl bottom(2). Lightly pull
the pinch tube end downwards til itl is well
arranged (3) (see figure 4).
figure 4
3
Gravity faucet: install the faucet handle and
the piston with its gasket (see figure 5).
figure 5
IMPORTANT
Insert the piston into its housing, taking care to
accompany it to the end so as to prevent it from
damaging the sharp edge around the hole .
figure 6)
4
Fit the bowl gasket to the evaporator. Note:
the largest brim of the gasket must face against
the drip plate (see figure 7).
5
Place bowl on the unit. Wet the gasket for
ease of insertion.
Please take care that the hook on the backside
of the bowl be inserted properly in its seat on the
upper drip plate. (see figure 8).
6
Use fresh product to chase any remaining
sanitizer from the bowl(s). Drain this solution. Do
(see
not rinse out the machine.
14
figure 6
figure 7
figure 8