BEARWARE 303457 Manual página 26

7.4 Projection
The "PROJECTION ON / OFF" switch at the back of the device allows you to
turn on the projection permanently (ON position) or by pressing a button (OFF
position).
In the "OFF" position", you can turn on the projection for 5 seconds by pressing
"ALARM / SNOOZE ".
Press the "Projection Flip" button to rotate the projection by 180°. You can move
the projector forward or backward to obtain the desired projection angle.
8. Display
Time display:
The time can be displayed in a 12-hour or 24-hour format. The desired format can
be selected in the basic settings.
Date and day:
The weather station has a date and day display. The day is marked with "D" and
the month with "M".
DCF symbol:
The weather station synchronises the time every night. The symbol begins flash-
ing during synchronisation. If the time has been successfully received, then the
symbol glows continuously until the next synchronisation.
Indoor temperature display:
The indoor temperature is measured by the base station and is shown to an ac-
curacy of one tenth of a degree. The configured temperature unit is displayed to
the right of the measured value. The temperature unit can be changed between
°C and °F. To do this, slide the °C / °F switch on the back of the weather station to
the desired position.
26
English