EMKO ESM-3721HT Manual De Instrucciones página 7

4.Front Panel Definition and Accessing to the Menus
1
2
BUTTON DEFINITIONS
1. Increment Button :
** It is used to increase the value in the Temperature and Humidity Set screens and Programming
mode.
2. Decrement, Silencing Buzzer Button :
** It is used to decrease the value in the Set screen and Programming mode.
** It is used to silence the buzzer.
3. Manual Start of Egg Tray Rotator Operation Button:
** In the main operation screen, if this button pressed engine starts.
engine start will be passive and engine stops.
4. Set Button:
** In the main operation screen; if this button pressed, set value will be displayed. Value can be
changed using increment and decrement buttons. When Set button pressed again, value is saved
and returns back to main operating screen.
** To access the programming screen; in the main operation screen, press this button for 3 seconds.
** It is used to saving value in the Set screen and programming screen.
LED DEFINITIONS
5. Heating Output Led :
** This led indicates that heating output is active.
6.Humidifier Output
** This led indicates that Humidifier output is active.
7. Egg Tray Rotator Output
** This led indicates that
8.Alarm led :
** It is active when alarm statuses.
9.Set led :
** Indicates that device is in Set value changing mode.
10.Program led :
** Indicates that device is in programming mode .
11.Auto Tune led :
**This led indicates that Auto Tune operation is active.
12.Celcius led :
** Indicates that device is in C mode.
13.Fahrenheit led :
** Indicates that device is in F mode.
5 6 7 8 9
Led :
Led :
Egg Tray Rotator Output
o
o
11 1213
10
ü ü
When the button is released the
is active.
3
4
7