Charge The Density Meter; Charge With The Ac Adapter; Charge With A Computer - Mettler Toledo Densito Manual De Usuario

4.3 Charge the density meter

You can either charge the density meter using the supplied AC adapter or a computer. Recharging an empty
battery takes approximately three hours.

4.3.1 Charge with the AC adapter

The AC adapter is suitable for all supply line voltages ranging from 100...240 V AC and 50/60 Hz.
Danger of death or serious injury due to electric shock!
Contact with parts that carry a live current can lead to death or injury.
1 Only use the METTLER TOLEDO AC adapter designed for your instrument.
2 Keep all electrical cables and connections away from liquids and moisture.
3 Check the cables and the plugs for damage and replace damaged cables and plugs.
NOTICE
Danger of damage to the AC adapter due to overheating!
If the AC adapter is covered or in a container, it is not sufficiently cooled and overheats.
1 Do not cover the AC adapter.
2 Do not put the AC adapter in a container.
Assemble the AC adapter
1 Slide the desired set of prongs (1) into the AC adapter (2).
2 Insert the USB-A plug of the USB-C cable in the USB-A
socket of the AC adapter.
Connect the density meter to the power supply
1 Insert the USB-C plug of the USB-C cable in the USB-C socket of the density meter.
2 Install the cables in such a way that they cannot be damaged or interfere with operation.
3 Insert the plug of the AC adapter in a power outlet that is easily accessible.
ð The density meter starts charging and the
Change the prongs of the AC adapter
1 Pull the plug of the AC adapter out of the power outlet.
2 Push the button (2) and slide the set of prongs (1) out.
3 Slide the desired set of prongs into the AC adapter.

4.3.2 Charge with a computer

§
A running computer with USB-A sockets (USB 2.0 or higher) is available.
1 Insert the USB-C plug of the USB-C cable in the USB-C socket of the density meter.
2 Install the cables in such a way that they cannot be damaged or interfere with operation.
3 Insert the USB-A plug in the USB-A socket of the computer.
ð The density meter starts charging and the
8
WARNING
icon is displayed.
icon is displayed.
1
2
1
2
Handheld Density Meter