Maintenance; Dirty Water Tank - Hoover PROFESSIONAL Serie Manual Del Usuario

Maintenance

How to Empty and Clean your Tanks:

Dirty Water Tank:

1
Turn the cleaner off and unplug
from electrical outlet.
2
Press latch and remove Dirty
Water Tank from the back of
the unit.
12
3
Carry Dirty Water Tank in an
upright position and place on
a flat surface.
4
Open Quick Pour Spout and empty.
5
Replace and close the Quick Pour
Spout.
6
Prior to replacing tank, check and
clean filter as needed.
7
Replace Dirty Water Tank by tilting
back then rocking it forward to
snap into place.
IMPORTANT
!
For full suction, it is important that the Dirty
Water Tank is properly secured before cleaning.
!