Specifications; Standard Features - Jacobsen CV Serie Manual De Seguridad Y Operacion

SPECIFICATIONS

GB
POWER
Engine
Horsepower
Bore and Stroke
Displacement
Oil Capacity
Governor
Air Cleaner
Compression Ratio
Starting System
Cold Starting
DRIVE TRAIN
Transmission
Filtration
Drive
Differential Lock
PTO DRIVE
Pumps
Filtration
ELECTRICAL SYSTEM
Charging
Lights
Starting
Warning System
FUEL
Type
Capacity
Fuel Filters

STANDARD FEATURES

* 4-Wheel drive
* Modular steel frame
* Hinged hood and seat plate for service
* Operator present safety system
* Automatic deck shut off in transport position
* Energy absorbing wing deck arms
* Hydraulic system test ports
* All controls mounted within easy reach and view of operator
* Pre-cleaner filter for oil cooler air intake
* Tiltable radiator for cleaning accessibility
* Rear bumper
* Heavy duty pivot supports for decks
* Solid bronze bearings for deck pivots
* Turf protector hydraulic oil (vegetable-based oil)
Perkins 4-cylinder, 4-cycle, liquid cooled diesel
50 at 2800 rpm
3.31" (84 mm) x 3.94" (100 mm)
135.2 cu.in. (2.2 L)
8.7 qt (8.2 L)
Mechanical, centrifugal ball type
Centrifugal flow, dry type
22:1
Key switch to 2.2 kw solenoid shift starter
Glow plugs
Sauer/Sundstrand M35 directly mounted to engine hot oil shuttle;
foot speed control with infinite number of speeds
10-micron
Full-time 4-wheel hydrostatic drive, 2-wheel for transport, 15 cu.in.
front wheel motors, 12 cu.in. rear wheel motors
Cross-flow parallel drive
Casappa hydraulic gear pump directly mounted to transmission
10-micron
40-amp alternator
Optional: 2 headlights; turn signals with 4-way flashers
12-volt with 650-amp cold cranking amps
Audible alarm for high engine coolant temperature and low engine
oil pressure; visual alarms for engine oil pressure, hydraulic oil
temperature, and charging system. Fuse and circuit breaker
protected.
Diesel
12 gal (45.4 L), high density polyethylene tank
10-micron, in-line, pre-filter and cannister filter.
JACOBSEN HR9510
SAFETY & OPERATION MANUAL
GB-39