Level Refrigerator; Reverse The Door Swing - Midea MRM33S7ASL Manual Del Usuario

LEVEL REFRIGERATOR

IMPORTANT: Level the refrigerator for proper operation and to avoid
cooling, frost and moisture problems that can occur when the door does
not close properly.
1.
Move the refrigerator to its final location. See "Move to Final Location."
2.
Place a carpenter's level on the top of the refrigerator cabinet.
3.
Adjust the two leveling feet, (one foot located at each of the two front
corners of the refrigerator cabinet) until the refrigerator is level.
NOTE: The leveling feet are easier to adjust if you have someone push
against the top front of the refrigerator to take some weight off the feet.
To Raise - Turn the leveling feet clockwise.
To Lower - Turn the leveling feet counterclockwise.

REVERSE THE DOOR SWING

1.
Unplug the refrigerator and remove all food from the door shelves.
Tape the door in place with masking tape.
10
List of tools to be provided by the user
Phillips-head
Screwdriver
5/16
" socket and
ratchet
Putty knife
Flat-head
Screwdriver
Masking tape