Environmental Information - ResMed Lumis HFT Guia Del Usuario

Rated maximum output
power of transmitter
(W)
1
10
100
For transmitters rated at a maximum output power not listed above, the recommended separation
distance d in metres (m) can be determined using the equation applicable to the frequency of the
transmitter, where P is the maximum output power rating of the transmitter in watts (W) according
to the transmitter manufacturer.
Notes:
• At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.
• These guidelines may not apply in all situations. Electromagnetic propagation is affected by
absorption and reflection from structures, objects and people.
Symbols
The following symbols may appear on the product or packaging.
Read instructions before use.
use. Manufacturer.
Catalogue number.
Protected against finger sized objects and against dripping water when tilted up to 15 degrees
from specified orientation.
Humidity limitation.
control logo 1.
law restricts these devices to sale by or on the order of a physician).
water level. Use distilled water only.
limitation. Complies with RTCA DO-160 section 21, category M.
the vicinity of an MRI device).
Alarm inhibit (Low SpO2 alarm is not available).
See symbols glossary at ResMed.com/symbols.

Environmental information

This device should be disposed of separately, not as unsorted municipal waste. To dispose of your
device, you should use appropriate collection, reuse and recycling systems available in your region.
The use of these collection, reuse and recycling systems is designed to reduce pressure on natural
resources and prevent hazardous substances from damaging the environment.
If you need information on these disposal systems, please contact your local waste administration.
The crossed-bin symbol invites you to use these disposal systems. If you require information on
collection and disposal of your ResMed device please contact your ResMed office, local distributor
or go to www.resmed.com/environment.
Separation distance according to frequency of transmitter (m)
150 kHz to 80 MHz
d = 0.35 √P
0.35
1.1
3.5
Indicates a warning or caution.
European Authorised Representative.
Serial number.
Direct current.
Temperature limitation.
China pollution control logo 2.
Oxygen supply inlet connector.
80 MHz to 800 MHz
d = 0.35 √P
0.35
1.1
3.5
Device number.
Type BF applied part.
Non-ionising radiation.
Prescription only (In the US, Federal
Operating altitude.
Importer.
800 MHz to 2.5 GHz
d = 0.7 √P
0.70
2.2
7.0
Follow instructions before
Batch code.
On / Off. Device weight.
Class II equipment.
China pollution
Maximum
Atmospheric pressure
MR unsafe (do not use in
Date of manufacture.
Medical device.
English 25