Adjusting The Volume; Monitor Panel Operations - Open/Tilt - JVC KW-AV71BT Manual De Instrucciones

Adjusting the volume

To adjust the volume
• On the source control screen, you can also adjust the
volume by moving your finger on the touch panel
as illustrated. (Not available depending on the AV
source.)
Decrease
To attenuate the sound
The ATT indicator lights up.
To cancel the attenuation, press [
Caution on the volume setting:
Digital devices produce very little noise compared
with other sources. Lower the volume before
playing these digital sources to avoid damaging
the speakers by sudden increase of the output
level.
(00 to 50)
Increase
] again.
Monitor panel operations —
Open/Tilt
1
On the source control screen:
2
Opens the monitor panel.
Open
Eject Ejects the disc.
Closes the monitor panel.
Close • Do not place your finger
Tilts the monitor panel.
Tilt +
Tilt –
Detach Detaches the monitor panel.
(☞ page 5)
Goes back to the current source
screen.
• When the ignition switch is turned to the ACC
position, you can also eject the disc. Press /HOME
to display the <Open/Tilt> screen.
9
behind the monitor panel.