GASPARDO PRIMAVERA Empleo Y Mantenimiento página 61

4.3.3 DOSING TEST
Adjust the doser with the unit on the ground, the motor turned
dosing test, make sure there are no foreign bodies inside the
hopper and the doser.
MECHANICAL VERSION
WARNING: Make sure the correct seeding roller is being used.
test!
The revolutions of the handle correspond to a 1/40 of a hectare.
Prior to the dosing test, it is necessary to perform a few revolutions
in order to load the dosing rollers with product. Unload the product
from the containers and place them back under the dosers. At this
point, the equipment is ready to perform the dosing test.
40
WARNING: after the test, close the spouts (Fig. 33) ...«WORK».
ELECTRIC VERSION
Carrying out the dosing test
- Press the button on the main electrical panel that activates the motors
of the dispensers (W, Fig.34) and calibrate the product distribution.
WARNING: Make sure the correct seeding roller is being used.
cod. G19503101
USE AND MAINTENANCE
B
TEST
TEST»
Table 2
WORK
W
ENGLISH
A