Internet Browser; Osd Rotation Support; Hdmi Out; Real Time Clock (Rtc) - Kimex 164-4920 Manual Del Usuario

In order to open the Start url that is defined the in
Settings>Signage>Link Options menu highlight the
Custom App option and press OK.
Notes:
Possible application dependent problems may be caused by
the content service provider.
Third party internet services may change, be discontinued or
restricted at any time.

Internet Browser

To use the internet browser enter the Apps menu first.
Then launch the internet browser application which
has an orange coloured logo with earth symbol on it.
(*) The appearance of the internet browser logo may change
In the initial screen of the browser, the thumbnails of
the predefined (if any) links to web sites available will
be displayed as Speed Dial options along with the
Edit Speed Dial and the Add to Speed Dial options.
You can press the Internet button on the remote to open
the initial internet browser page. If the Open browser
initial page URL in the Settings>Signage>Link
Options menu is defined, the browser will open on
this page. Otherwise this button will not be functional.
To navigate the web browser, use the directional
buttons on the remote or a connected mouse. To see
the browser options bar, move the cursor to the top of
the page. History, Tabs and Bookmarks options and
the browser bar which contains previous/next buttons,
the refresh button, the adress/search bar, the Speed
Dial and the Vewd buttons are available.
To add a desired website to the Speed Dial list for
quick access, move the cursor to the top of the page.
The browser bar will appear. Highlight the Speed Dial
- button and press the OK button. Then select Add
to Speed Dial option and press the OK button. Fill in
the blanks for Name and Address, highlight OK and
press the OK button to add. Whilst you are on the site
you wish to add to the Speed Dial list, highlight the
Vewd button and press the OK button. Then highlight
Add to Speed Dial option in the submenu and press
the OK button again. Name and Address will be filled
automatically according to the site you are visiting.
Highlight OK and press the OK button to add.
You can also use the Vewd menu options to manage
the browser. Highlight the Vewd button and press
the OK button to see available page specific and
general options.
There are various ways to search or visit websites
using the web browser.
Enter the address of a website(URL) into the search/
address bar and highlight the Submit button on the
virtual keyboard and press the OK button to visit the
site.
Enter keyword/s into the search/address bar and
highlight the Submit button on the virtual keyboard
and press the OK button to start a search for the
related websites.
Highlight a Speed Dial thumbnail and press the OK
button to visit the related website.
Your Display is compatible with USB keyboard/mice.
Plug your device into the USB input of your Display
for easier and quicker navigation.
Some web pages include flash content. These are not
supported by the browser.
Your Display does not support any download
processes from the internet via the browser.
All sites on the internet might not be supportted.
According to the site; content problems may occur.
In some circumstances video contents might not be
able to be played.

OSD Rotation Support

You can change the
of your Display if desired. While performing First
time installation set the OSD Orientation option as
desired when the Signage menu is displayed. You
can also change this setting later from the Signage>-
Controls menu. Available options are:
Portrait 1 and Portrait 2

HDMI Out

The HDMI port located on the rear left side of the
Display functions as an output port (upper HDMI port,
HDMI Out). This port will not function as an input,
thus no source devices should be connected to this
port. Only the content received from the HDMI input
port located also on the rear left side of the Display
(lower HDMI port, HDMI1 In) can be outputted from
this port. The contents received from other inputs,
such as VGA or Display Port, can not be outputted.
This is a default function and you can not disable/
enable through any menu option. HDMI output port
will always function if a source device is connected
to the specified HDMI input.

Real Time Clock (RTC)

Your Display has an RTC. It is used to maintain the
real date and time information for a period of time if
the energy supply is interrupted by separating the
Display from the mains or by a power blackout. In this
case the Display will use the date and time information
stored in RTC.
• All time sources are able to override RTC date/time.
• Display tries to connect to the NTP server period-
ically (6 hours after last update) to get the current
date and time information. If the Display successfully
gets these informations from the NTP server, it
updates itself and RTC with the received date and
English - 25 -
OSD (On Screen Display)
Landscape,
.
rotation