Rs232/Lan Command Tables - Kimex 164-4920 Manual Del Usuario

RS232/LAN Command Tables

Command
VOLUME
GETVOLUME
HEADPHONEVOLUME
GETHEADPHONEVOLUME
SETHEADPHONEOUTPUT Set headphone output
GETHEADPHONEOUTPUT Get headphone output
GETMUTE
SETMUTE
SETSOUNDMODE
SETBALANCE
GETBALANCE
SETAVL
GETAVL
SETDAPAVL
AUDIO COMMANDS
Description
Set volume level.
Volume level information. no parameter
Set headphone volume
level.
Headphone volume level
information.
Get mute status.
Toggle mute status.
Set sound mode.
SETEQUSERFREQ
100Hz 10
It's available if TV source
is active.
Set balance value.
Get balance value.
Set AVL state.
Get AVL state.
Set DAP (Dolby Audio
Processing) AVL state.
English - 28 -
Parameter
integer n (0 ≤ n ≤ 100)
integer n (0 ≤ n ≤ 100)
no parameter
string n (headphone,lineout)
no parameter
no parameter
no parameter
integer n (0 = mono, 1 =
stereo, 2 = dual I, 3 = dual
II, 4 = mono left, 5 = mono
right)
integer n (-50 <= n <= 50)
no parameter
integer n (0 = off, 1 = on)
no parameter
integer n (0 = off, 1 = normal,
2 = night, 3 = auto)
Return
#*set volume to n
#*volume level is ...
#*set headphone volume to n
or
#*invalid headphone volume
level entered
#*headphone volume is ...
#*set headphone output to n
or
#*Invalid Parameter
#*LINEOUT
or
#*HEADPHONE
#*MUTE OFF
or
#*MUTE ON
#*MUTE OFF
or
#*MUTE ON
#*setSoundMode() set to n
or
#*Invalid sound mode entered
or
#*TV Source is inactive.
#*set balance level to n
or
#*invalid balance level entered
#*balance level is ...
#*AVL is not changed due to
DAP (Dolby Audio Processing
Availability) is active
or
#*set avl state to n
or
Invalid parameter (0-1)
#*DAP (Dolby Audio Processing
Availability) is active
or
#*avl state is ...
#*DAP AVL is not changed due
to DAP (Dolby Audio Processing
Availability) is inactive
or
#*DAP AVL is not changed due
to DAP (Dolby Audio Processing
Availability) Mode is off
or
#*Set DAP (Dolby Audio
Processing) state to n
or
Invalid parameter (0-1-2-3)