Control Buttons On The Display - Kimex 164-4920 Manual Del Usuario

Rear Side (2)
1. SPDIF Optical Out
2. Audio In
3. RJ12 (for sensor)
4. RJ12 (service use only)

Control Buttons on the Display

1
2
3
4
English - 7 -
To turn on the Display: Press the centre of
the joystick in and hold it down for a few
seconds, the Display will turn on.
To turn the Display off: Press the centre
of the joystick in and hold it down for a few
seconds, the Display will turn into standby
mode.
To change source: Press the centre of the
joystick in, the sources list will appear on the
screen. Scroll through the available sources
by pushing the joystick up or down.
To change volume: Increase the volume
by pushing the joystick right. Decrease the
volume by pushing the joystick left.
Note: Main menu OSD cannot be displayed via
joystick.