Usb Auto Play Feature With Playlist Scenario; Cec And Cec Rc Passthrough; Usage Of The Start Url - Kimex 164-4920 Manual Del Usuario

directory of the removable device, Media Browser
will play the Photos in a sequence (in file name order)
instead of Video or Audio files. If not, it will be checked
for Video content and as last Audio.
This feature will only work if all of the following cir-
cumstances occur:
• The USB device is plugged in.
• USB Auto Play option is enabled. It is placed in the
Settings>System>More menu.
USB Auto Play Feature with Playlist
Scenario
If there is a file named as "playlist.txt" installed on the
connected USB storage device, the new scenario is
started. The media content in this file will be played or
displayed according to the entered sequence.
To activate this function, a file named "playlist.txt"
should be installed on the USB storage device. Also,
the first line of the file must start with "//**do usb auto
play**//".
Files which to be displayed/played must be written line
by line in playlist.txt. The "/* */" expression provides to
comment out the line. During playing content, only the
volume and standby buttons are used. Other buttons
perform the exit operation.
Sample file content:
//**do usb auto play**//
picture.jpg
video.mp4
picture2.jpg
/*picture3.jpg*/
video2.mp4
Scheduler playlist scenario
In this scenario, if the Source option is set as USB
while creating a scheduler, playlist options will be
displayed. The user can create 3 different playlists.
When the scheduler is activated, the playlist scenario
is started.
During the autoplay, the selected playlist will be
checked first. If the selected playlist is not available in
connected the USB storage device, the default playlist
file will be checked. If the default playlist file is not
found, it works just like the USB Auto play scenario.
Failover Feature
If No Signal option in the Settings>Signage>Controls
menu is set as Failover the Display checks the
connected USB device for available files to play. If no
playable files are available or there is no USB device
connected to the Display, the No Signal image will
be displayed and the Display will turn itself off after
a period of 5 minutes. If there isn't any No Signal
Image available, No Signal OSD will be displayed on
the screen and the Display will turn itself off after a
period of 5 minutes.
Note: The setting of the USB Auto Play option in the
Settings>System>More menu is not important, in Failover
mode it will function anyway.

CEC and CEC RC Passthrough

This function allows to control the CEC-enabled
devices, that are connected through HDMI ports by
using the remote control of the Display.
The CEC option in the Settings>System>More menu
should be set as Enabled at first. Press the Source
button and select the HDMI input of the connected
CEC device from the Sources List menu. When
new CEC source device is connected, it will be listed
in source menu with its own name instead of the
connected HDMI ports name(such as DVD Player,
Recorder 1 etc.).
The Display remote is automatically able to perform
the main functions after the connected HDMI source
has been selected. To terminate this operation and
control the Display via the remote again, press and
hold the "0-Zero" button on the remote control for 3
seconds.
You can disable the CEC functionality by setting the
related option under the Settings>System>More
menu accordingly.
The Display supports ARC (Audio Return Channel).
This feature is an audio link meant to replace other
cables between the Display and an audio system (A/V
receiver or speaker system).
When ARC is active, the Display does not mute its
other audio outputs automatically. You will need to
decrease Display volume to zero manually if you
wish to hear the ARC audio only (same as optical or
co-axial digital audio outputs). If you want to change
connected device's volume level, you should select
that device from the source list. In that case volume
control keys are directed to connected audio device.
System Audio Control
Allows an Audio Amplifier/Receiver to be used with the
Display. The volume can be controlled using the remote
control of the Display. To activate this feature set the
Speakers option in the Settings>System>More
menu as Amplifier. The Display speakers will be
muted and the sound of the watched source will be
provided from the connected sound system.
Note: The audio device should support System Audio Control
feature and CEC option should be set as Enabled.

Usage of the Start URL

• Create a file named "starturl.txt" in the root directory
of any USB storage device. Make sure that the
extension is "txt".
English - 13 -