Use The Gun; Change The Nozzle; Install The Detergent Tank - GreenWorks GPW1804CK Manual Del Operador

EN
13.2

USE THE GUN

For safe control, keep your hands on the gun at all times.
• Pull and hold the gun trigger (11) to start the machine.
• Release the gun trigger (11) to stop water flow through
the nozzle (4).
13.2.1 UNLOCK THE GUN TRIGGER
• Push backward the trigger safety button (12).
13.2.2 LOCK THE GUN TRIGGER
• Push forward the trigger safety button (12).
13.3

CHANGE THE NOZZLE

Before you change the nozzle:
1. Pull the gun trigger (11) to release water pressure.
2. Lock the trigger safety button (12) on the gun (6).
3. Stop the mahcine.
Do not point the spray wand at your face or others'.
WARNING
1
2
3
WARNING
WARNING
English
13.3.1 NOZZLE TYPE
SPRAY TIP
O
40
13.3.2 INSTALL THE NOZZLE
1. Pull back the quick-connect collar on the spray wand (3).
2. Install the nozzle (4) onto the spray wand (3).
3. Release the quick-connect collar to attach the nozzle (4).
13.4

INSTALL THE DETERGENT TANK

Do not use household detergents, acids, alkalines, bleaches,
solvents, flammable material, or industrial grade solutions,
which can do damage to the pump.
Do the instructions on the solution bottle to prepare
detergent.
If it is necessary, use a funnel to prevent the spill of
detergent. Clean and dry the spilled detergent when you fill
it.
1. Put the detergent into the detergent tank (10).
2. Install the detergent tank (10) onto the gun (6).
3. Turn counter-clockwise the gun (6) to tighten.
8
APPLICATION
White - Wide fan tip (40° )
• The white 40 degree tip, referred to
as the "fan" tip creates the widest
area of cleaning with relatively low
pressure. This pressure washer tip is
best used for light or delicate clean-
ing applications. It is recommended
for light cleaning on wood decks and
other soft or delicate surfaces.
Turbo Nozzle Tip
• The nozzle rotates in a zero to 15 de-
gree spray pattern in a circular mo-
tion to break down tough dirt and
grime. The spray pattern can cover
area of 4 to 8 inches wide, depending
on a distance between the tip and the
surface being cleaned.
WARNING
WARNING
NOTE