Install The Battery Pack; Remove The Battery Pack; Operation; Use The Gun - GreenWorks GDC40 Manual Del Operador

EN
15
16
1. Uncoil the garden hose (15).
2. Thread adapter (12) to the male garden hose (15).
3. Pull back the adaptor collar and attach to the male
connector (16) on the machine.
4. Turn the water supply off.
5. Let the water flow through the garden hose (15) for 30
seconds.
There must be a minimum of 10 feet of free hose between
the water inlet and the water supply.
7.4.2 INSTALL THE BUCKET
4
1. Add water to the bucket (4).
2. Align the water inlet connector (17) with the water inlet
(16).
3. Install the bucket (4) onto the base.
4. Lift and push down the bucket buckle to fix the bucket
(4).
Pull the bucket buckle to unlock the bucket.
7.5

INSTALL THE BATTERY PACK

18
12
CAUTION
17
WARNING
English
• If the battery pack or charger is damaged, replace the
battery pack or the charger.
• Stop the machine and wait until the engine stops before
you install or remove the battery pack.
• Read, know, and do the instructions in the battery and
charger manual.
1. Open the battery door.
2. Align the lift ribs on the battery pack with the grooves in
the battery compartment.
3. Push the battery pack into the battery compartment until
the battery pack locks into place.
4. When you hear a click, the battery pack is installed.
5. Close the battery door.
7.6

REMOVE THE BATTERY PACK

1. Open the battery door.
2. Push and hold the battery release button (18).
3. Remove the battery pack from the machine.
8

OPERATION

Make sure that all the connections are tight and have no
16 leakage before operation.
8.1

USE THE GUN

For safe control, keep your hands on the gun at all times.
• Pull and hold the gun trigger (10) to start the machine.
• Release the gun trigger (10) to stop water flow through
the nozzle (19).
8.1.1 UNLOCK THE GUN TRIGGER
• Push backward the trigger safety button (14).
8.1.2 LOCK THE GUN TRIGGER
• Push forward the trigger safety button (14).
8
WARNING
WARNING
WARNING