EAS ELECTRIC EMRH908BX Manual página 22

Installation
Accessories. See Fig.3. (Type and quantity of accessories is

subject to actual demand.)
Fix installation plate and extension chim ney installation plate, install

the plastic expansion pipes of chimney installation plate on wall.
See Fig.4.
Hang range hood on the installation plate. See Fig.5.

Fix the exhaust pipe on the main body,

screws (ST5*50) to prevent the range hood from accidently sliding
off the installation plate.
Connect chimney installation plate and chimney. See Fig.7.

 Fix chimney installation plate. See Fig.8.
Fix the extension chimney. See Fig.9.

See Fig.6.
7
Fig.4
open the filter and lock
EN-6
Fig.5
V.5