EAS ELECTRIC EMRH908BX Manual página 24

Speed adjustment. See Fig.10.2.
After plugging, buzz once to decl

electricity. After the connection:
Pr ess the Power button, contro

press this button, motor will run at low speed, and light for power
and low speed button will be on; under power-on state, press this button,
hood will enter 3-min-delay-shutdown st
under this state, the hood will turn off( motor stops running).
Press the Light button, control

without any other buttons' help. Press it once, lights will be on.
Press again, they will be off.
Pr ess the High b utton, valid under p ower-on state. While running at

middle or low speed mode, press this button, the hood will enter high
speed mode. If already running at high speed, pressing this button takes
no effect. In 3-min-delay-shutdown state, press it, the hood cancels
delay shutdown mode and enter high speed running state.
 Press the Low button, valid under power-on state. While running at
high or middle speed mode, press this button, the hood will enter low
speed mode. If already running at low speed, pressing this button takes
no effect. In 3-min-delay-shutdown state, press it, the hood cancels
delay shutdown mode and enter low speed running state.
Light
(For some models)
l motor power: under standby state,
light being on and off independently
Low Mid
Fig.10.2
EN-8
are the hood is connected with
ate, press power button again
High Power
V.5