Zanussi ZWT 71401 WA Manual De Instrucciones página 24

600 mm
min.
560 mm
min.
820 mm
75 mm
60 mm
We recommend that you keep the
packaging and the transit bolts for
any movement of the appliance.
Preparation and assembly of the door
The appliance is originally prearranged for the
assembly of a door opening from right to left
(see picture below)
Door
• - width 595-598 mm
• - thickness 16-22 mm
The height X depends on the height of the
adjacent furniture's base.
24
596 mm
555 mm
818 mm
170 mm
100 mm
16-22 mm
Ø 35 mm
14 mm
Hinges
To mount the hinges drill two holes (dia. 35 mm,
depth 12.5-14 mm depending on the depth of
door furniture) on the inner side of the door.
To fix the hinges to the door use the screws for
wood 1 and 2 supplied with the appliance (see
below).
The distance between the holes hobs fixing
centres must be 416 mm. The distance from
upper edge of the door to the centre of the hole
depends on the adjacent furniture's dimensions.
Door mounting
To mount the door fix the hinges to the
appliance using the M5x15 screws.
Do not remove the screw B !!
The hinges can be adjusted to compensate for
possible uneven thickness of the door.
X
416
mm
22±1,5 mm
595-598 mm
2
1
www.zanussi.com