Getting Started; Selecting A Network; Setting Language And Country; Software Updates - Porsche Wall Charger Connect Manual De Funcionamiento E Instrucciones De Instalación

Operating options

Fig. 5: Operating options
A Back
B Up/Down
C Activity
D Details
E Skip

Getting Started

Configure the following settings before starting to
use the charger for the first time.
Information
– Options marked S can be skipped. A setting is
KIP
not configured in this case.
– Settings can always be changed on the display
(S ).
ETTINGS
Language and country
1. Select a language from the list. Confirm your
selection.
2. Select a country from the list.
3. Confirm the selected language and country.
Data transmission
e Read and confirm instructions for transmitting
data.

Software updates

In order to guarantee the full functionality and
reliable operation of the charger, the latest software
must always be installed.
e Select and confirm option for automatic
software update.
On: The charger checks whether software
updates are available and downloads them
automatically.
The installation can then be started directly
or postponed to a later time.
Off: The charger checks whether software
updates are available and displays a
corresponding message. The download can
then be started manually.
Once the download is complete, the installation
can then be started directly or postponed to
a later time.
If an Internet connection with the charger cannot
be established, software updates can also be
downloaded manually via the web address
in the E-Performance area at https://
www.porsche.com and installed via the
web application.

Selecting a network

Select the option for connecting to a home network.
The option can be skipped with S
KIP
to a home network is established in this case.
When the charger is connected to an existing home
network, enhanced functions and information will be
available. The connection can be established via WiFi
or a Powerline Communication network
(PLC network).
If there is no home network available,
a hotspot can be set up on the charger.
Connection via WiFi
1. Select the W
2. Select the home network from the list of
detected WiFi networks.
3. Enter and confirm the password.
Connection via PLC pairing button
1. Select the PLC
2. Start the connection setup process on the PLC
modem. Confirm by pressing OK on the charger.
Once the setup is connected, confirm with
C .
ONNECT
The connection to the PLC network is
established.
If a connection to the PLC network is established, the
symbol will be displayed in the status bar.
Connection via PLC security code
A device on which the control software for the PLC
network is installed must be used for this method.
1. To establish a connection to a PLC network using
the security code, select PLC
The security code appears on the display.
2. Enter the security code in the relevant menu of
the control software for the PLC network in order
to integrate the charger into the PLC network.
The connection to the PLC network is
established.
If a connection to the PLC network is established,
the symbol will be displayed in the status bar.
User profiles (Link Porsche ID)
. No connection
When the charger is paired to your Porsche ID,
information about the charger and the charging
processes can be displayed in My Porsche
and in the Porsche Connect app.
Operating Instructions
F option.
I I
option.
PAIRING BUTTON
.
SECURITY CODE
US
FC
ESM
9