About Video Outputs Connection - Pioneer VSX-820 Manual De Instrucciones

03 Connecting your equipment
Component video cables
Use component video cables to get the best
possible color reproduction of your video
source. The color signal of the TV is divided into
the luminance (Y) signal and the color (P
P ) signals and then output. In this way,
R
interference between the signals is avoided.
Component video cables
Green (Y)
Blue (P
22
En
B
)
B
Red (P )
R

About video outputs connection

This receiver is not loaded with a video
converter. When you use component video
and
cables or HDMI cables for connecting to the
input device, the same cables should be used
for connecting to the TV.
The signals input from the analog (composite
and component) video inputs of this unit will
not be output from the HDMI OUT.
Terminal for connection with source device
P
HDMI IN
P
HDMI OUT
Terminal for connection with TV monitor
The OSD will not
appear.
Video signals can be output.
Playback
component
P Y
R B
COMPONENT VIDEO IN
P Y
R B
COMPONENT VIDEO OUT
VIDEO IN
MONITOR OUT
TV