ABB EOH Serie Boletín De Instrucciones página 14

Installation
Cable outlets
1
Cable entry/exit
The top and bottom cable entry/exit are blank for own holes.
The enclosure has to maintain the NEMA classification when
installing cable entry/exit. It is not allowed to do any other extra
holes except cable entry/exit to the enclosure. Check all parts
for possible metal shavings. Remove any shavings.
1/10 Installation | Instruction Bulletin EOH367, EOH368, 1SCC340033M1401 / A
CAUTION
The enclosure has to maintain the NEMA classification when installing
cable entry/exit. It is not allowed to do any other extra holes except
cable entry/exit to the enclosure. No responsibility is assumed by ABB
for any consequences arising out of the installing of cable entry/exit or if
any other extra holes done to the enclosure.
CAUTION
HAZARD OF INJURY OR EQUIPMENT DAMAGE
Do not in any circumstances bend or twist the locking hook fixed on
the door. Wrong position of the door hook causes the malfunction of
the locking mechanism that may result in personal injury or equipment
damage.
Failure to follow these instructions can result in injury or equipment damage.