ABB EOH Serie Boletín De Instrucciones página 8

Applications
The EOH series heavy duty fusible safety switches are
1
side-operated, 3 pole, 600V switches, housed in steel sheet
enclosures, available in UL environmental rating TYPE 1 with
side-operated handle.
Heavy duty fusible safety switches offer the ability to manually
open and close a circuit and provide overcurrent protection
through field installed fuses. Products can be used as
Disconnecting Means or on the load side of a branch circuit
protective device and are suitable for use as motor disconnects.
Neutral link
(optional)
Ground bus
The EOH367, EOH368 heavy duty fusible safety switches up to 600 VAC, 3-ph with the ground bus (included) and the neutral link N (optional)
1/4 Applications | Instruction Bulletin EOH367, EOH368, 1SCC340033M1401 / A
Auxiliary contacts
(optional) inside the
mechanism
Fuses
(to be ordered separately)
Catalog numbers:
NEMA1: EOH367, EOH368
General purpose current ratings: 800 A, 1200 A
Standards: UL98, UL50, UL4248-1, NEMA KS1, CSA
Enclosure material specification: Electrically galvanized steel,
polyester powder coating. Thickness: door 0.079 in /2 mm,
enclosure walls 0.079 in / 2 mm, enclosure bottom 0.079 in / 2
mm (EOH367_) and 0.118 in / 3 mm (EOH368_). Handle: glass
reinforced polyamide (PA f1), polycarbonate (PC f1).
Enclosure color: ANSI 61 (light gray)
Disconnecting means
Short circuit protective device
Controller
Overload protection
Motor disconnection