Introduction For Buttons On Remote Controller - Gree GKH(12)BB-K6DNA3A El Manual Del Propietario

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

3.3 Introduction for buttons on remote controller

Note:
● This is a general use remote controller, it could be used for the air conditioners
with multifunction; For some function, which the model doesn't have, if press
the corresponding button on the remote controller that the unit will keep the
original running status.
● After putting through the power, the air conditioner will give out a sound.
After that, you can operate the air conditioner by using remote controller.
1
ON/OFF button
Press this button can turn on or turn off the air conditioner. After turning on the air
conditioner, operation indicator "
The colour is different for different models), and indoor unit will give out a sound.
2
MODE button
Press this button to select your required operation mode.
● After selecting auto mode, air conditioner will operate automatically according to
ambient temperature. Set temperature can't be adjusted and will not be displayed
as well. Press "FAN" button can adjust fan speed. Press "
fan blowing angle.
● After selecting cool mode, air conditioner will operate under cool mode. Press "+"
or "-" button to adjust set temperature. Press "FN" button to adjust fan speed.
Press "
" button to adjust fan blowing angle.
● When selecting dry mode, the air conditioner operates at low speed under dry
mode. Under dry mode, fan speed can't be adjusted. Press "
fan blowing angle.
● When selecting fan mode, the air conditioner will only blow fan, no cooling and
no heating. All indicators are OFF. Operation indicator is ON. Press "FAN" button
to adjust fan speed. Press
● When selecting heating mode, the air conditioner operates under heat mode.
Press "+" or "-" button to adjust set temperature. Press "FAN" button to adjust
fan speed. Press "
receive heating mode signal. If setting heat mode with remote controller, press
ON/OFF button can't start up the unit).
Note:
● For preventing cold air, after starting up heating mode, indoor unit will delay 1~5
minutes to blow air (actual delay time is depend on indoor ambient temperature).
● Set temperature range from remote controller: 16~30℃ ; Fan speed: auto, low
speed, medium speed, high speed.
DC Inverter Free match Series Cassette Type Unit
AUTO
COOL
"
" button to adjust fan blowing angle.
" button to adjust fan blowing angle. (Cooling only unit won't
"on indoor unit's display is ON (green indicator.
DRY
FAN
5
HEAT
" button can adjust
" button to adjust

Publicidad

Tabla de contenido
loading

Tabla de contenido