Pioneer BDP-88FD Manual De Instrucciones página 44

08
Setting
HDMI Mode
Also refer to Setting the HDMI Mode on page 18.
Color Space
HDMI Audio Out
Control
To use Sound Retriever Link and PQLS function (pages 18), Control must be set to On.
HDMI Deep Color
When [30bits] or [36bits] is selected, set the color space (page 44) to a setting other than YCbCr 422.
HDMI 3D
3D Notice
IP Address Setting
Proxy Server
Information
Connection Test
BD-Live Connection
DLNA
44
En
Options Explanation
Video and audio are output simultaneously from the two HDMI OUT
Dual
terminals. Select this when you want to output video and audio to two TV sets
simultaneously.
Separate Select this when you want to output the video and audio separately, the video
from the HDMI OUT (MAIN) terminal, the audio from the HDMI OUT (SUB)
terminal.
Pure Audio Select this to enjoy music only with a better sound quality when devices are
connected to both HDMI output terminals. With this setting, music is output
from the HDMI OUT (SUB) terminal only, and video signals are only output
from the HDMI OUT (MAIN) terminal when DISPLAY is pressed.
Single This is selected when connecting a device for use with the HDMI OUT
(MAIN) terminal only.
RGB Select this to output the video signals as RGB signals. Choose this if the
colors seem too faint and the black seems too bright.
Select this to output the video signals as YCbCr 4:4:4 signals.
YCbCr
YCbCr 422 Select this to output the video signals as YCbCr 4:2:2 signals.
Full RGB Select this to output the video signals as RGB signals. Choose this if the colors
seem too dense and all the dark colors are displayed in a uniform black.
Select this to output HDMI audio signals directly.
Bitstream
PCM Select this to output HDMI audio signals converted to PCM audio signals.
Reencode When a BD containing secondary audio and interactive audio is played, the
two audio signals are mixed and converted to Dolby Digital audio or DTS
audio for output.
Select this to control the player with the remote control of the connected AV
On
device using an HDMI cable. Also refer to page 18.
Off Select this when you do not want to control the player with the remote control
of the connected AV device using an HDMI cable.
30bits Select this when outputting the video signals with 30-bit color.
Select this when outputting the video signals with 36-bit color.
36bits
Off Select this when outputting the video signals with normal 24-bit color.
With 3D discs, the disc is played with 3D images.
Auto
Off 3D images are not played.
This sets whether or not to display the 3D notice when playing 3D images.
Yes
No
Select this to set the IP address of the player and DNS server (page 47).
Only set the proxy server if so instructed by your Internet service provider (page 47).
Displays the values of the MAC address, IP address, subnet mask, default gateway, DNS server
(primary) and DNS server (secondary).
Select this to test the network connection (page 47).
All discs are allowed to connect to BD-LIVE.
Permitted
Partial Permitted Only discs whose safety has been confirmed are allowed to connect to BD-LIVE.
Prohibited No disc is allowed to connect to BD-LIVE.
Select this when connecting to DLNA server.
Enable
Disable Select this when not connecting to DLNA server.