Pioneer BDP-88FD Manual De Instrucciones página 48

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Select and set Options  BUDA  BUDA Setup.
1
08
Use / to select, then press ENTER.
2
Select and set Fmt buda.
Press ENTER.
 Registering or Changing the
password
Use this procedure to register or change the code
number required for the Parental Lock settings.
About default password of this unit
The default password is "0000".
• This unit might ask you to enter a password when you
change the password.
• If you reset this unit, your password is simultaneously
changed to the default setting.
Select and set Security  Change Password 
1
Next Screen.
Use / to select, then press ENTER.
2
Input the password.
Use the number buttons (0 to 9) to input the number, then
press ENTER to set.
Use / to move the cursor.
3
Re-input the password.
Use the number buttons (0 to 9) to input the number, then
press ENTER to set.
Use / to move the cursor.
• To change the password, input the previously
registered password, then input the new password.
Note
• We recommend making a note of the password.
• If you have forgotten the password, reset the player to
the factory default setting, then register the password
again (page 49).
 Changing the Parental Lock level for
viewing DVDs/BD-ROMs
Some DVD-Video discs containing scenes of violence, for
example, have Parental Lock levels (check the indications
on the disc's jacket or elsewhere). To restrict viewing
these discs, set the player's level to the level lower than
the discs.
Select and set Security  Parental Control 
1
Next Screen.
Use / to select, then press ENTER.
2
Input the password.
Use the number buttons (0 to 9) to input the number, then
press ENTER to set.
Use / to move the cursor.
3
Change the level.
Use / to change, then press ENTER to set.
48
En
Note
• The level can be set to Off or between Level1 and
Level8. When set to Off, viewing is not restricted.
 Changing the Country/Area code
Select and set Security  Country Code  Next
1
Screen.
Use / to select, then press ENTER.
2
Input the password.
Use the number buttons (0 to 9) to input the number, then
press ENTER to set.
Use / to move the cursor.
3
Change the country/area code.
Use / to change, then press ENTER to set. Refer to
page 52.

Publicidad

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Bdp-85fd

Tabla de contenido