Britax B-SAFE GEN2 FLEXFIT Guia Del Usuario página 27

B-SAFE GEN2 FLEXFIT & FLEXFIT PLUS User Guide
5� Push the infant car seat
firmly into the vehicle
seat while removing
all slack from the lap
portion and then the
shoulder portion of the
vehicle belt�
Carrier Only Installation with Lap-Shoulder Belt
ü Check that the vehicle belt is tight, not twisted, and
that the infant car seat is secure� The infant car seat
is secure when it moves less than 1 inch (2�5 cm)
front-to-back or side-to-side at the vehicle belt path�
ü Check that the recline angle is correct� The proper
recline angle is achieved when the level line on the
carrier is level to the ground�
ü Check that the infant car seat handle is rotated into
any locked position�
CHECKLIST
25