Festo ASI−EVA−4E Serie Instrucciones Para El Usuario página 13

1 User
The AS−Interface input module type ASI−EVA−4E... is used
for registering input signals in bus systems in accordance
with the AS−Interface specifications. If additional commer
cially−available components such as sensors and actuators
are connected, the specified limits for pressures, tempera
tures, electrical data, torques, etc. must not be exceeded.
AS−Interface bus systems and input modules may only be
installed by personnel especially trained for this purpose.
Detailed information on the design and addressing of your
bus system can be found in the manual for your AS−Inter
face master.
Warning
S Switch off the power supply before connecting or
disconnecting plugs (otherwise this could lead to
functional damage).
Please note
Commission only a valve terminal which has been fitted
and wired completely.
Festo ASI−EVA−4E... 0401b English
instructionsEnglish
13