General Description; Installation - Cebora TIG 438 Manual De Instrucciones

3

GENERAL DESCRIPTION

Remote panel Item No 438 is an accessory in the Cebora WinTIG range. The panel can be used with the following
power sources:
Item
Item 438
The panel is compatible with power sources in manual range /00 and power sources in the Automation /80 range.
The remote panel is used with connection Item No 2065.XX.
Always use original accessories� The use of non-original accessories renders the warranty cover for Item
No 438 and the power source in use null and void�
This unit can be used to adjust welding parameters in TIG, Plasma Welding, TIG Cold Wire and Plasma Welding+ Cold
Wire processes.

Installation.

4 INSTALLATION
Connect remote panel Item No 438 to connector CN3 on the back of the welding power source.
Connector CN3 is already present on robot /80 range power sources, so simply connect cable 2065 to connector CN3
and turn SW on the back of the machine down to OFF position.
Items 394, 395, 396, 380
The software could have been updated, therefore the device in use may offer functions not described in
these user instructions, or the opposite may apply� Individual figures may also deviate slightly from the control
elements present on the device in use. The operation of these control elements is nevertheless identical.
394�XX 395�XX
X X
396�XX
X
NOTICE!
Item 381
NOTICE!
380�80 381�XX
X X
17/24