Safety Notes; Intended Use; Product Features; Tool Specifications - Würth TBS-M Traducción Del Manual De Instrucciones De Servicio Original

Read all safety warnings and
all instructions. Failure to follow
the warnings and instructions may result in serious
injury.
Save all warnings and instructions for future
reference.
 Use only the machines listed for driving in screws
with the screwdriving attachment.
 The safety information of the drive tool must be
observed and met.
 To ensure the reliable functioning of the machine,
use only the screw strips listed in the technical data.
 Do not direct the machine against other persons or
animals.
 For long hair, wear hair protection. Work only with
closely fitting clothes.

Intended Use

The device is intended for the efficient screwdriving of
drilling screws, chipboard screws and wood screws in
trade and industry.
For damage caused by usage other than intended, the
user is responsible.

Tool Specifications

Magazine screw
attachment
Article number
Screw strip capacity
Screw size
– Screw length
– ShankØ
– Screw lengthØ
Adapter
Mounting flange-Ø
Weight
For Your Safety

Safety Notes

TBS-M
0702 051 100
50 screws
25–55 mm
min. 3.5 /max. 4.2 mm
max. 8.2 mm
23 mm
0.50 kg
Working safely with this product
is possible only when the operat-
ing and safety information are
read completely and the instruc-
tions contained therein are strictly
followed.
 Hold the machine firmly. When driving in screws,
high reaction torque can occur.
 While working, always keep proper footing.
 Insert the screw strips only when the drive tool is
switched off.
 Ensure tight seating of the work surface.
 For further safety instructions, refer to the enclosed
sheet.
 Use only original Würth accessories.

Product Features

1 Screwdriving bit
2 Adapter
3 Drive spindle
4 Drive tool
5 Quick-action locking screw
6 Scale
7 Knurled screw for screw-in depth
8 Depth stop
9 Guide
10 Fastening screw (size 4 mm)
Not all of the accessories illustrated or described
are included as standard delivery.
Assembling
To drive the screwdriving attachment, only drywall
screwdrivers of the Würth screwdriver program are
suitable together with the two supplied adapters. Com-
patible drywall screwdrivers are indicated on the
adapters.
Mount the adapter 2.
Insert the screwdriving bit 1 into the drive spindle 3.
7