GB
1
1
Working safely with this machine is
possible only when the operating
and safety information are read
completely and the instructions
contained therein are strictly fol-
lowed.
Before using for the first time, ask
for a practical demonstration.
2
Wear hearing protection.
Wear safety glasses, protective gloves and
3
sturdy shoes.
When necessary, also wear an apron and
helmet.
4
Keep children away from the machine.
Persons under 18 years of age are not per-
mitted to operate the tool.
5
Do not leave the machine unattended.
When driving studs in ceilings and walls,
6
check for electrical, gas and water lines un-
der the plaster with the aid of a metal detec-
tor, for example.
Safety Regulations
Stud Driving Tool
Never overload the tool.
Alterations to the tool endanger life and limb and
are strictly prohibited!
Munitions/Attachment Parts
Cartridge munitions should be available only to
designated persons.
Use only original attachment parts.
During pauses in the work, do not leave cartridge
strips in the tool.
Do not throw cartridges in fires.
Cartridges that misfire should be stored separate-
ly and returned to the Würth Company.
For your safety
2
3
For additional safety information, see the sections on detailed safety
instructions and intended usage
5
4
Never point the tool at persons or ani-
mals. Danger to life!
Never place a hand in front of the tool.
Danger of injury!
Always hold the tool with both hands.
Danger of injury!
Never apply the tool at an angle. Dan-
ger of injury!
Operate the tool only with the splintering pro-
tector mounted.
Perform a functional check each time before
putting into operation.
Use the correct cartridge strength.
Take care that the working location is safe.
Make attachments only on suitable base materi-
al.
Protective Equipment
The following personal protective equipment must be
in accordance with the safety requirements in all
cases:
Clothing
Glasses
Gloves
Helmet
Hearing protector
Non-skid shoes
Safety devices to prevent falling
6
13