LEVELLING.-
Once the unit has been placed into its final position,
make sure that it sits flat on the floor and that it is
level. This can be achieved by screwing the
adjustable feet up or down, as shown in Fig.7.
MOVEMENT & STORAGE.-
The unit is equipped with wheels (107), as shown in
Fig.8, which make it easier to move.
The two wheels at the front of the unit make it
easier to place the unit in to any chosen position by
lifting the rear slightly Fig.8.
Store your unit in a dry place, preferably not subject
to changes in temperature.
Do not hesitate to get touch with the Technical
Assistance Service if you have any queries by
phoning customer services (see last page in manual)
BH RESERVES THE RIGHT TO MODIFY THE
SPECIFICATIONS OF ITS PRODUCTS WITHOUT
PRIOR NOTICE.
11