Always take the motor out of the water after use. This can be achieved by tilting
the motor.
Grounding protection
The auto kick-up setting protects the motor in the event of grounding. It
provides no guarantee that potential grounding will not cause damage to the
propeller or even the motor. This applies particularly in the event of grounding
on stones or rock.
1
Fig. 15:
Tilt lever
1
Tilt lever
page 26 / 140
ADV IC E
ADV IC E
The tilt lever (1) allows the motor to be tilted upwards in the event of ground
contact when it is in the tilt/auto kick-up position (lever up). In this position,
reversing and braking are not possible.
In the Lock position (lever down), automatic tilting upwards is switched off.
Reversing is possible.
Tilting the motor upwards
Fig. 16:
Tilting position
1. Set the tilt lever (1) to the Tilt / Auto kick-up position (lever up).
2. Grasp the Travel system's battery handle and tilt the motor unit up to the stop.
The tilt lever locks in position.
3. Ensure that the motor unit is locked in position.
Operation
V. 1.0 / English