Kohler Vanity Guía De Instalación Y Cuidado página 7

Screws
4. Install the Optional Legs
NOTE: To protect the finished surface of the vanity, perform
assembly tasks on a flat, padded work surface.
NOTE: The right and left leg assemblies are identical.
Lay the vanity top down on a flat, padded surface.
Position a leg assembly at each side of the vanity, aligned over
the pre-drilled holes.
Secure each leg assembly to the vanity using the screws provided.
With assistance, turn the vanity upright to rest on its legs.
Kohler Co. 7 1216526-2-F