Power Management Function; Care And Maintenance - LEXIBOOK RCD102 Serie Manual De Instrucciones

Non-rechargeable batteries are not to be recharged. Rechargeable batteries are to be
removed from the product before being charged. Rechargeable batteries are only to be
charged under adult supervision. Different types of batteries or new and used batteries are
not to be mixed. Only batteries of the same or equivalent type as recommended are to be
used. Batteries are to be inserted with the correct polarity. Exhausted batteries are to be
removed from the product. The supply terminals are not to be short circuited. Do not throw
batteries into a ire. Remove the batteries if you are not going to use the game for a long
period of time.
WARNING: Malfunction or loss of memory may be caused by strong frequency interference
or electrostatic discharge. Should any abnormal function occur, remove the batteries and
insert them again, or unplug the unit from the mains socket and re-plug it again.
Unit will automatically go to standby mode after 15 minutes without operation.
To resume operation, simply press the STANDBY button to turn on the unit.
Caring for compact discs
• Treat the disc carefully. Handle the disc only by its edges. Never
allow your ingers to come in contact with the shiny, unprinted side of
the disc.
• Do not attach adhesive tape, stickers, etc. to the disc label.
• Clean the disc periodically with a soft, lint-free, dry cloth. Never use detergents or abrasive
cleaners to clean the disc. If necessary, use a CD cleaning kit.
• If a disc skips or gets stuck on a section of the disc, it is probably dirty or damaged
(scratched).
• When cleaning the disc, wipe in straight lines from the
centre of the disc to the outer edge of the disc. Never
wipe in circular motions.
• This unit is designed to play only compact discs bearing
the identiication logo as shown here. Other discs may not
conform to the CD standard and may not play properly.
• Discs should be stored in their cases after each use to avoid damage.
• Do not expose discs to direct sunlight, high temperatures or dust, etc.
• Prolonged exposure or extreme temperatures can warp the disc.
• Do not stick or write anything on either side of the disc. Sharp writing
instruments, or ink, may damage the surface.
Cleaning the unit
• To prevent ire or shock hazard, disconnect your unit from the AC power source when
cleaning.
• The inish on your unit may be cleaned with a dust cloth and cared for as other furniture.
Use caution when cleaning and wiping the plastic parts.
• Mild soap and a damp cloth may be used on the front panel.
RCD102seriesIM1084_19Feb_V10.indd 14

POWER MANAGEMENT FUNCTION

CARE AND MAINTENANCE

14 14
19/02/2014 3:14 PM