•
For the harness to be fitted, position the harness on the seat of the Avant, so that the
buckle is facing upwards.
•
Insert the crotch strap through the mnattress pad and the seat.
•
Do the same with the two abdominal straps and the two chest straps.
•
The chest straps can be placed in 3 different positions, depending on the child's height.
The chest straps should be positioned at the height of the child's shoulders and both
straps should be at the same level.
•
Fit the chest pads.
Removing/fitting the cover
•
Remove the safety harness.
•
Undo all the clasps that fasten the cover onto the seat.
•
To fit the cover place it on the seat, then insert the two strips between the backrest and
the seat, fasten them.
•
Fasten the two clasps found on the seat and the two on the sides.
•
Pass the two strips on the backrest of the cover through the slots in the seat and fasten them.
•
Lastly, fasten the remaining clasps to the backrest, and the two on the headrest.
Fitting/removing the mattress pad
•
Undo the safety ha rness buckle.
•
Pass the harness buckles through the vents in the seat.
•
Place the mattress pad on the seat. Pass the straps through one of the vent positions of
the mattress pad.
•
Fasten the two clasps of the headrest and the two Velcro strips.
•
Fasten all the components of the harness.
•
Fit the protector pads.
NOTE: take care when fitting the harness to make sure that the straps are not twisted.
Unisystem
•
This exclusive fastening system means that the following complements can be used
on the Avant pushchair: Prima Easy, Prima Fix, Baby Zero Plus, Playmoon, Mako,
Metropol, Sono o Newmoon.
•
The procedure for fitting all of them is the following:
•
Put the parking brake on.
•
Place the Prima Easy, Prima Fix, Baby Zero Plus, Playmoon, Mako, Metropol, Sono or
Neewmoon on the pushchair, facing backwards.
NOTE: THE HANDLE OF THE BABY ZERO PLUS SHOULD BE SET TO THE
CARRYING POSITION WHEN IT IS USED WITH THE AVANT.
20
(illustrations 26–27)
(illustration 24)
(illustration 25)