Dpl Supported Commands - Brady BBP 33 Manual Del Usuario

DPL Supported Commands

Commands
Set Cut Amount By
(Command must be issued and a cut will not occur until
job is done.)
Set Continuous paper Length
Input Image Data
(Only value "B" is supported for "f" parameter.)
Enter Label-Formating Command
Set Printer Metric
Set Printer Inches
Print Time and Date
Set Format Attribute
(Only 2, "Transparent Mode" parameter is supported.)
Set Column Offset Amount
(The maximum BMP33 offset is .1", if a value larger is
entered, it will be set to .1")
Set Cut by amount
(See ":" command)
Terminate Label formatting Mode and Print Label
Heat Setting
Select Mirror Mode
Set Metric Mode
Set Inches Mode
Set Print Speed
(Only values A,C,E,G, 1 - w ips respectively are
supported. If an unSupported value is entered, it will
default to 2 ips.)
Set Quantity of Labels to Print
Set Row Offset Amount
(See "C" command)
®
33 Sign & Label Printer User's Manual
BBP
Note: These commands conform Revision D, 2001 Datamax Programmer's
Manual
Commands Descriptions
DPL Supported Commands
Commands
DPL
:
<STX>c
<STX>I
<STX>L
<STX>m
<STX>n
<STX>T
Label Format Mode
A
C
c
E
H
M
m
n
P
Q
R
-
A 7