Adding Medication And Assembling The Parts - Omron Comp Air Elite Manual De Instrucciones

NE-C30_main.book Page 12 Friday, October 3, 2008 11:46 AM
3. Preparing the nebuliser for use
3.2

Adding medication and assembling the parts

1.
Remove the mouthpiece and cap from the
nebuliser kit.
2.
Remove the inhalation top from the medication
tank.
1)
Rotate the inhalation top anti-clockwise.
2)
Lift the inhalation top out of the medication
tank.
3.
Remove the vaporiser head from the medication
tank.
4.
Add the correct amount of prescribed
medication to the medication tank.
Caution: The capacity of the medication
Note: Scales on the nebuliser kit are for
reference only. The scale on the outside
of the tank is with vaporiser head in place.
The scale on the inside is with no vaporiser head. Please use the
scale on your syringe or vial for accurate measurement of
medication.
12
tank is 2 to 7 ml.
2
1
max
5
3